DT650 is an 11ax Wi-Fi standard Qualcomm Chipset wall mount Wireless Access Point with multiple ports and support MU-MIMO, Wave2.0, OFDMA and Seamless Roaming.
DT650 is an 11ax Wi-Fi standard Qualcomm Chipset wall mount Wireless Access Point with multiple ports and support MU-MIMO, Wave2.0, OFDMA and seamless roaming. Combined 1800Mbps Wi-Fi speed over 2 radios: 2.4GHz (600Mbps 11ax 2*2) + 5GHz (1200Mbps 2*2), equipped Gigabit WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation.
Combined 1800Mbps Wi-Fi speed over 2 radios: 2.4GHz (600Mbps 11ax 2*2) + 5GHz (1200Mbps 2*2), equipped Gigabit WAN & LAN ports, support MU-MIMO and DL/UL-OFDMA modulation, faster Ethernet data rate and more users, then multiple users can upload or download multiple packets at same time, narrower subcarrier spacing and longer symbol time, improved the stability and data processing efficiency, publicly to be used in high density access environment such as university campus, concert venue, gymnasium, etc.
Main Features
TWT (Target Wake-up Time). 802.11ax support TWT, allowing devices to negotiate when need to wake up, send and receive data. In additional, wireless AP can group the device into different TWT cycles, increase sleep time, reduce the device competing after wake-up, and save the device power.
Coverage Improvement. 802.11ax support long OFDM symbol transmission mechanism and 2MHz narrowband transmission, effectively reduced the packet loss rate and noise interference, improve the receive sensitivity and increase the WiFi coverage.
Improvement of Anti-Interference Ability. 802.11ax support BSS color bit and dynamic CCA-SD (Clear Channel Assessment Signal Detection) threshold and power adjustment, effectively alleviates the channel interference in multi-users scenarios, improve the utilization of spectrum resources.
Chipset |
IPQ6000 +QCA8075+QCN5022+QCN5052 |
Standard |
802.11ax/ac/b/g/n |
Flash |
SPI NOR 8MB (1.8v) + NAND 128MB |
DDR3L |
512MB |
2.4G Frequency |
2.4GHz - 2.484GHz |
2.4G Wi-Fi standard |
802.11b/g/n/ax |
5.8G Frequency |
5150~5850MHz |
5.8G Wi-Fi Standard |
802.11 a/n/ac/ax |
Interface |
1 * 10/100 /1000 RJ45 WAN Port, active PoE |
4 * 10/100 /1000 RJ45 LAN Port |
|
1 to 1 pass-through RJ45 Port |
|
1 * Console Port |
|
1 * USB2.0 port for power charge |
|
1 * Reset button, press 10 seconds to revert to default setting |
|
Antenna |
Build in 2dBi 2.4G MIMO antenna |
Data Rate |
1800Mbps |
End Users |
150+ |
2.4G RF Power |
≤ 20dBm |
5.8G RF Power |
≤ 19dBm |
DC |
12V----1.5A |
PoE |
48V (IEEE 802.3af) |
LED light |
Sys, 2.4G Wi-Fi, 5.8G Wi-Fi, WAN, LAN*4 |
Power Consumption |
≤ 12W |
Size |
160mm*86mm*29mm |
Working Environment |
Working Temperature: -30°C to 45°C; |
There is no other product related this product .
There is no "How to Make" document related this product .